PRODUCTS
Recent Products

Control & Protection

Paths : Home > Products > Control & Protection > KTO011 & KTS011

KTO 011: Thermostat (normally closed NC) Heating thermostat is used with various heaters.

KTS 011: Thermostat (normally open NO) heat dissipation thermostat. Can be used with filter 

fan and heat exchange or switch to signal device when the temperature exceeds the limit.

Suitable for all kinds: cabinets, electrical control cabinets, complete sets of cabinets, electrical boxes, network boxes, monitoring boxes, computer rooms, etc.: internal constant temperature, KTO 011: can be used with various heating bodies, automatically disconnect the heating body when the set temperature is reached, preventing If the temperature is too high, make the internal temperature of the chassis reach the ideal value to prevent the formation of water droplets or the temperature is lower than the minimum value. Protect the internal equipment and components of the chassis from rusting and corrosion.


Switching temperature difference7K (± 4K tolerance)
Sensing elementBimetal temperature sensing material
Contactor typeKick contact
Contact resistance< 10
Service life> 100 000 cycles
Maximum exchange capacity250VAC, 10 (2) A
120VAC, 15 (2) A
DC 30W
Electromagnetic compatibilityEN 55014-1-2, EN 61000-3-2, EN 61000-3-3
Connection method2-pole terminal table, the maximum clamping torque is 0.5Nm: steel wire 2.5mm², steel strand (wire end with iron cover) 1.5mm²
Installation35mm DIN rail clip (EN50022)
ShellUL94 V-0 light grey plastic
Dimensions60 x 33 x 43mm
Weight40g
Working Temperature0 to to +60°C (+32to to +140°F) / -20to to +80°C (-4to to +176°F)
IP gradeIP20